The CC-Link Partner Association (CLPA) announces that Mitsubishi Electronic Automation is opening up new market opportunities by embedding CC-Link IE Field Safety features into their MR-J4-GF Servo Amplifiers. CC-Link IE Field Safety meets both IEC and ISO safety standards.
The 1-Gbit per second (Gbps) data-transfer rate provides the necessary speed and capacity required for Industry 4.0 requirements. This additional bandwidth capacity over the current standards used for motion communication can allow for both necessary safety control, as well as for any future diagnostic communications and other non-real time transmissions; thus meeting future Industry 4.0 & IIoT requirements.
With the CC-Link IE Field Safety integration and the additional option card MR-D30 attached, the MR-J4-GF now meets international safety standards for Category 4 PLe SIL3. The integration also makes the system configuration much simpler and cleaner, according to CC-Link, by reducing wiring. OEMs can save time and money with this easier configuration because they only need to connect the Mitsubishi Electric Simple Motion Module with the servo amplifier to establish safety communications over the network.
“The safety signal from the safety PLC can be transmitted directly to MR-J4-GF via CC-Link IE Field. This feature is especially beneficial for OEMs and end users in automotive, packaging, welding and material handling applications, as well as any industries with safety requirements,” said Elaine Wang, senior product marketing engineer, Mitsubishi Electric Automation, Inc. “End users can easily access the safety information or functions through Mitsubishi Electric’s graphic operation terminal.”
Information about the MR-J4-GF Servo Amplifiers and their integration with CC-Link IE Field Safety features is available here.
