Expert blames poorly protected, remotely accessed PLCs for 2026 cyberattacks

Most recent incidents have targeted water utilities, but programmable logic controllers are very common gear in manufacturing IT and OT. And Tributech CTO claims security problems aren't worth the time and money that remote access saves.

What you'll learn:

  • Recent cyberattacks have targeted internet-facing PLCs, particularly at water utilities, causing operators to lose monitoring and control of equipment.
  • Tributech’s CTO says PLCs were designed for trusted networks and often lack the security needed for modern remote access, making them attractive targets to threat actors.

  • Organizations should remove PLCs from the public internet, strengthen access controls and adopt zero-trust security practices to reduce risk, he advises.

As cyberattacks spread, threat actors more and more are accessing systems through internet-facing programmable logic controllers that organizations in many industrial sectors commonly use, making them vulnerable to attacks, regardless of the size of the organization.  

The FBI and Environmental Protection Agency in July issued a public service announcement to warn critical infrastructure asset owners and operators that malicious cyber actors were conducting cyberattacks targeting OT devices. These incidents included Rockwell Automation/Allen-Bradley PLCs, but popular Siemens controllers also have faced attacks that involved AI-generated code.  

See also: What to do about PLC attacks on your OT infrastructure  

“PLCs were built for closed plant networks, where anyone who could reach the device was trusted. Remote connectivity was added later, but the trust model stayed the same," said Patrick Lamplmair, chief technology officer and co-founder at Tributech, a provider of industrial IoT data infrastructure. 

PLCs often are used by manufacturing organizations to oversee industrial processes in a reliable and cost-effective way.

But Lamplmair explained that while remote access over cellular modems saves them time and money, this is also why so many controllers end up being reachable from the internet and, therefore, vulnerable to intrusion. 

"A PLC cannot tell an operator from an attacker. Once someone reaches it, it accepts a new password, a new IP address, or new logic without question. That design assumption turned a simple login into locked-out operators and boil water notices," Lamplmair said. 

A PLC cannot tell an operator from an attacker. Once someone reaches it, it accepts a new password, a new IP address, or new logic without question.

- Patrick Lamplmair, CTO and co-founder, Tributech

Since July, water and wastewater utility companies in at least seven states have reported incidents to the FBI. Threat actors targeted internet-facing PLCs used to monitor and control industrial equipment at water and wastewater facilities andthenchanged the PLCs’ IP addresses and passwords, resulting in a loss of monitoring and control. 

While the FBI has only observed this behavior with the Rockwell PLCs, similar considerations should also be made with other branded PLCs, according to the chief U.S. law enforcement agency.  

See also: Reports: AI agent security incidents rise as adoptions continue to climb 

In many small-scale utilities, the same people that operate awater treatment facility may also perform networking, SCADA administration, compliance reporting and cybersecurity-related duties, a problem that is compounded by the lack of resources and OT cybersecurity specialists.

"Size no longer keeps a utility off the target list," Lamplmair said. 

'Start with the basics'  

As attacks continue to impact manufacturers and other organizations in the U.S., companies are bracing for upcoming requirements of the European Union's Cyber Resilience Act, which took effect last year and marked a significant change in how manufacturers in the E.U. manage cybersecurity for connected products.  

The CRA applies to U.S. manufacturers selling into Europe, with reported obligations taking effect in September and full requirements to follow in December. The CRA requires products to be secure from the outset and stay secure throughout their lifecycle. 

See also: New Rockwell report reveals glaring disconnect between cybersecurity investments and risk protection 

In terms of how organizations can prepare for attacks in the current threat landscape, Lamplmair said to start with access.  

"Start with the basics: Know which controllers can be reached from outside, take them off the public internet and set a strong password on each one," he said, adding that remote access through VPN should be the only exception.  

"With zero trust, users and applications no longer get network access to the control system. They get permission to read or write specific values and nothing else. Existing plants can add this as software at the IT/OT boundary, without replacing their controllers," he said.  

And while segmentation and patching are still important, they only provide defense around the controller.  

"The next step is zero trust at the command level: every write to a control system is tied to a verified identity and checked against safe operating limits before it reaches the device." 

About the Author

Sarah Mattalian

Sarah Mattalian

Staff Writer

Sarah Mattalian is a Chicago-based journalist writing for Smart Industry and Automation World, two brands of Endeavor Business Media, covering industry trends and manufacturing technology. In 2025, she graduated with a master's degree in journalism from Northwestern University's Medill School of Journalism, specializing in health, environment and science reporting. She does freelance work as well, covering public health and the environment in Chicagoland and in the Midwest. Her work has appeared in Inside Climate News, Inside Washington Publishers, NBC4 in Washington, D.C., The Durango Herald and North Jersey Daily News. She has a translation certificate in Spanish.

Sign up for our eNewsletters
Get the latest news and updates